Your current location£ºHome > Products

Power DP Bec 3102#




 Item No£º3102

Details£º

         

 ºÚ2.jpgºÚ3.JPG

 

Produce features:
l          Dual battery input design, automatic switching and balancing between batteries£¬Avoid accidents caused by bad contacts using a single block powered battery.
l          Compared with the traditional mechanical switch integrated electronic switch has a higher security and stability.
l          Twelve channels for input, connect up to 34 servos, one channel CDI remote flameout switch.
l          Each channel has a signal buffer and amplification
l         Built-in the a remote CDI flameout switch, makes flying safer
l          Independent CDI power supply socket. Receiver power completely separates with the CDI power, so you should not worry about that CDI arouses high frequency signal will interfere the receiver.
l          Independent 5V linear regulator which provide a separate pure working power supply to the receiver.
l          Built-30ABEC (Max: 40A), servos provides adequate pure operating current
l          4.8-9.7V output voltage, adapt to a variety of high and low voltage servos
l          Dedicated receiver placement, avoid receiver damage due to accidental bombing
l          Real-time display of the voltage value; under voltage sound and light alarm
 
Technology parameters:
l          Working voltage: 6-12.6V
l          Servos work of current, voltage :0-30A, 4.8-9 .7 V (factory voltage is 5.2V)
l          Weight:180g
l          Volume:150mm(long)*80mm(wide)*20mm(height)
l          Working temperature:-20¡æ to 85¡æ.
 
Function description:
 
A
1-12 input channel
¸´¼ş 1.jpg
B
CDI remote flameout switch control channel / switch of remote controller channel
C
CDI working power indicator light.
D
CDI power input terminal.
E
CDI power output terminal.
F
CDI power voltage indicator light.
G
The voltage alarm settings button
H
Battery 2 input
I
The power supply switch of the board
J
Battery 1 input
K
Regulate output voltage value: 4.8-9.7V
L
Alarm LED interface
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CDI signal states of the power supply:
 
The green light on
The green light flash
The red light on
The red light flash
Voltage above 4.8V
4.5V-4.8V
4.2V-4.5V
Voltage below 4.2V

 

Video:v.youku.com/v_show/id_XNTM5Nzc4ODUy.html

 


Specification£º
Last Product£º¡¾Power DP 3101#¡¿         Next Product£º¡¾Refueling nozzle 3103 #¡¿